Identifying the hazards

4wd Courses

Security Courses

Roadcraft Courses

Consultancy Service

4wd Newsletter

Sign up! Each month, you'll get 4wd driving tips, course info and special offers.

View Back Issues>>

Equipment

NEW: ResQMe. A revolutionary new vehicle escape and rescue tool!

EXTREME recovery gear made by OK off-road in the United States. Selected to hold-up to pulling typically heavy 4x4's (including armoured ones) during the rainy season!

Can You Spot 6 Road Hazards?  

There is no such thing as an empty road.
Published April 24, 2007.
(click here for a larger version of image.)

This road scene may look safe!! And it can be fairly safe as long as the conditions have been identified correctly and the driver has fully understood the implications of the hazards; the correct position, correct speed and correct gear have to be applied before driving into the hazardous area.

A few answers with explanations:

1. Unsealed road.
   An unsealed road is an unstable road surface. Even though it MAY LOOK hard and compact you still have approximately 50% less available traction than on a sealed road. Braking distance is about double that of a sealed road for instance. Makes sense then to take this into account and reduce speed.
2. Changes in road colour.
   Looking ahead through the road scene you can see that the road changes colour quite often. This indicates differences in the amount of available traction that you may have. For instance if the colour changes from normal to a darker shade then this could indicate that the road surface is wet. If it changes from normal to paler it could indicate that it has become dusty.
3. Adverse (negative) camber.
   These can be severe on unsealed roads. They are a major cause of roll-overs. It is imperative that they are recognized well in advance and the vehicle is prepared to drive on them if, for instance, the vehicle has to be pulled over to let oncoming vehicles pass.
4. Grass verges.
   These can have an adverse camber and at the same time be very soft. Again a contributor to roll-overs.
5. Pedestrians in the road.
   Indicates that you may be driving into an area where there may be a settlement which is not visible. Crops on the side of the road also indicate this. Be prepared for the local population not having the same amount of “road sense” as the in an urban situation. Plan on “what ifs” with respect to worse case. A child running across the road for instance.
6. Poor visibility on road side.
   Hides potential hazards such as livestock, children, bicycles on small tracks etc. Another reason not to drive too fast!. The faster you go the longer your reaction distance is going to be. Therefore, slowdown to make sure that you cannot be surprised! Again forward planning with respect to worse case has to be applied.